How Frequently Should a Water Softener Regenerate?

How often should a water softener regenerate?
How ofttimes a water softener will regenerate or recharge, is controlled by the valve of a h2o softener system. The valve or "control valve" is the 'encephalon' of the softener unit, since it gives the commands every bit to when the softener regeneration process volition occur. But first, allow's discuss WHY regeneration occurs.

Why does a water softener regenerate or backwash?

In ion substitution water softeners, difficult water is passed through a bed of softening material called resin.  As the hardness minerals in water come in contact with the resin, the resin is attracted to the hardness minerals and holds onto them.

With the hardness minerals trapped in the resin and removed from the water, the water becomes "soft".  Over time, h2o softener resins get completely covered with hardness minerals and demand to be cleaned. That'southward when backwashing takes place– to make the system "regenerate" or ready to start the softening process again.

What happens during the regeneration process?

During the regeneration process, the water softener floods the resin with brine h2o, thereby "cleaning" the hardness minerals off the resin and sending them down the drain.

The softening resin in the h2o softener is now clean and ready to soften h2o again. This cycle is repeated approximately weekly, depending on water usage, allowing your dwelling to have consistently soft h2o.

How does a h2o softener know Watertech Reionator with Triton Valvewhen to regenerate?

In that location are a broad variety of softener makes and models –and a number of unlike valve types, as well. But a h2o softener regenerates when the control valve tells it to start the regeneration procedure. In that location are two different types of regeneration used in h2o softening, depending on the type of valve you have: time-initiated regeneration and demand regeneration.

  1. In "time-initiated regeneration", the clock on the control valve is typically prepare to accept the system regenerate subsequently a certain number of days and at a fourth dimension of 24-hour interval with depression h2o usage (default setting is often ii am). This procedure will echo itself at least one time a week, at minimum. A water treatment professional person volition determine the valve's settings based on the quality of your h2o, the size of your resin tank, household water usage, number of people living at that place, etc. If there is a need for water while the organisation is regenerating, untreated h2o is available through an automatic internal bypass feature.
  2. With demand regeneration settings , the valve keeps track of water usage and sends the softener into "regeneration mode" after a predetermined amount of water has been processed through the softener. It'south sort of like your jail cell phone–if you have a lot of apps open and are using your telephone a lot, you'll have to accuse the telephone more often.Need regeneration works the aforementioned way. The more h2o you're using, the more oft information technology will need to backwash. For instance, if you accept guests staying at your domicile and are using more water than normal, your unit volition need to regenerate more than often.

Both types of regeneration take worked well over many years.  Demand regeneration is frequently considered more efficient in both table salt and water usage because the arrangement just regenerates when it has used upwards it'due south softening chapters instead of just regenerating on a given day, whether it needs regeneration or not (could happen with time-initiated).

When should I check my softeners' control valve?

If you experience an extended power outage (over an hour in length), y'all may need to reset the time of twenty-four hours on the control valve. Most valve's internal batteries are designed to retain the time of 24-hour interval for upwards to 24 hours. Refer to your softeners' installation and maintenance guide for more details.

When should I call a Water Treatment Professional?

Change in Water Quality : If you lot experience a alter in water quality …

  • First check to run across if your brine tank is empty and more table salt needs to exist added .
  • Bank check to come across if your system has power.
  • Cheque to come across if the drain line has a kink that may be restricting flow during regeneration.Free Water Test

If you've ruled out these iii factors, then phone call your local water handling professional person  ASAP. Nosotros recommend that you have your water softener serviced annually. This is of import because:

  1. A water handling professional can test your water to make sure that the constituents in your water have non changed in the past twelvemonth. Although our public water supply is carefully monitored to ensure water regulations are being maintained, there can be changes at your local municipal plant.  Based on water test results, a professional tin can modify your system settings, install a prefilter, or any is needed to ensure you lot proceed to have outstanding water.
  2. Having your water softener serviced annually will ensure the settings are optimized to save you money.
  3. If information technology seems like your softener is regenerating besides often, a professional tin change the settings or make needed repairs. If service and/or parts are required, brand sure to have your softener manufacturer'south warranty handy. Keep in mind that regenerating more than oft than needed is costing y'all money in water usage as well as extra salt.
  4. A water treatment professional can sanitize and clean your system to make sure your system continues to produce the best possible water for your domicile.

Looking for a professional who really knows water? WaterTech has authorized water treatment dealerships throughout the country. Find one nearly yous.

find a watertech dealer